Fontana FS2210 — Architect‑Grade Spec Page
Architect‑Ready Overview
Fontana FS2210 — Wall‑Mount Sensor Faucet + Soap Dispenser
A consolidated, contactless fixture for high‑traffic commercial washrooms. Solid brass body, infrared activation, AC or battery power, with submittal‑ready documentation. Designed for clean detailing and rigorous daily use.
Solid Brass Body
Dual Infrared Sensors
AC Hardwire / 6V Battery
Architectural Finishes incl. Matte Black
Touchless Cycle
Auto‑shutoff (factory set)
Use CaseHigh‑Traffic
InstallationWall‑Mount
ComplianceADA / Public
Submittal Package
Download & Coordinate
Bundle the essentials for design coordination, tender, and record sets.
- Include shop drawings with rough‑in dimensions and clearances.
- Submit finish samples (e.g., matte black) for approval.
- Provide O&M including cleaning agents permitted on finish.
- List applicable listings/approvals required by AHJ.
Detailing
Rough‑In & Integration
- Coordinate spout height/reach with basin to limit splash.
- Provide concealed power supply location (if AC), accessible for service.
- Ensure wall blocking and moisture management behind finish surface.
- Allow access for soap refill path; confirm bottle capacity and viscosity range.
Verify flow rate and local water use code (e.g., ≤ [project gpm]) before final selection.
Editable Spec Text
CSI 3‑Part (Guide – Edit for Project)
Section 22 42 39 — Commercial Sensor Faucets (Guide)
PART 1 — GENERAL
1.1 SUMMARY
A. Touchless wall‑mounted faucet with integrated soap dispenser for public restrooms.
B. Basis of Design: Fontana FS2210 or approved equal.
1.2 SUBMITTALS
A. Product data, cut sheets, and shop drawings with rough‑in.
B. Samples: Finish samples for exposed components.
C. Quality Assurance: Listings/approvals as required by AHJ.
D. O&M data: Cleaning, maintenance, battery replacement (if applicable).
1.3 WARRANTY
A. Manufacturer’s standard warranty; minimum 5 years on body/valve, [confirm electronics].
PART 2 — PRODUCTS
2.1 MANUFACTURER
A. Fontana Showers — Model FS2210.
2.2 PERFORMANCE
A. Operating Pressure: 10–125 psi.
B. Flow Rate: [____] gpm at [____] psi (verify project requirements).
C. Power: 110V AC hardwire or 6V DC battery pack.
D. Controls: Infrared sensors; factory auto‑shutoff (adjustable).
E. Materials: Solid brass body; finish [Matte Black / ____].
F. Mixing: Provide thermostatic or manual mixing as indicated.
G. Electronics: Water‑resistant enclosure; IP rating [____] (submit).
2.3 ACCESSORIES
A. Supply stops, filters, and backflow prevention as required.
B. Soap reservoir [capacity ____]; compatible viscosity range [____].
PART 3 — EXECUTION
3.1 INSTALLATION
A. Install per manufacturer’s instructions and approved shop drawings.
B. Provide wall blocking and coordinate electrical rough‑in.
C. Adjust sensor range and flow; verify splash control with basin geometry.
3.2 FIELD QUALITY CONTROL
A. Functional testing of water and soap cycles.
B. Verify shutoff timing and leak‑free operation.
3.3 CLOSEOUT
A. Submit O&M and spare parts schedule; train Owner’s personnel.
|
|
|
