Touchless Faucet Battery & Power Planning
Battery-operated and AC/DC hybrid touchless faucets for commercial
restrooms where wiring is constrained or backup power is critical.
Ideal for airports, healthcare, education, and civic projects that
demand predictable performance and clear power specs.
Fontana touchless faucets offer AC 110–240V + DC 6V options
(4×AA alkaline), with low-consumption solenoids and battery lifespans
tested to tens of thousands of cycles—suited to retrofit work,
phased renovations, and tight shutdown windows.
• AC/DC hybrid power (110–240V with 6V battery backup)
• 4×AA alkaline packs, up to 50,000 cycles per set
• Low-battery indication, diagnostic LEDs, ADA-compliant bodies
Touchless Faucet Battery Options for Your Specs
AC/DC Hybrid Touchless Faucets
Specify faucets that run on both line voltage and batteries for
redundancy in critical facilities. Ideal where uptime is
non-negotiable and power outages are part of the design brief.
The Fontana Deck Mounted Automatic Commercial Touchless Sensor
Faucet in Matte Black (FS2142) operates on AC 110–240V with a 6V
(4×AA) battery backup. Power draw stays under 2.5W in active mode
with micro-power standby to extend battery life.
View AC/DC Matte Black Faucet
Battery-Only & Retrofit Sets
When conduit is not feasible, battery-operated faucet sets enable
clean retrofits on existing lavatories. Battery packs mount
under-counter in accessible boxes, keeping the deck uncluttered.
The Fontana Lyon Battery Operated Auto Faucet with Soap Dispenser
(FS-MS-1899) uses an infrared AI smart chip, a 30-second auto
shutoff, and an energy-saving design tuned for high-traffic
restrooms.
See Lyon Battery Faucet + Soap
Battery Life, Diagnostics & Maintenance
Operations teams need predictable service intervals. Many Fontana
touchless faucets include LED codes for power-up, low-battery, and
solenoid status, allowing quick troubleshooting without guesswork.
Typical configurations use 4×AA alkaline batteries rated for up to
50,000 activations in normal traffic, depending on flow rate and
shutoff timing. Call out access to battery compartments in your
casework details so swaps stay under 5 minutes per faucet.
Explore Battery-Operated Models
BIM, Power Specs & Coordination
Coordinate electrical, plumbing, and millwork early using BIM
objects and CSI cut sheets that include AC/DC options, battery-pack
locations, and mounting clearances. Reduce RFIs and rough-in
rework.
Download BIM families and specification sheets for battery-ready
touchless faucets—both deck and wall-mount—for clean handoff to
documentation and field teams.
Open BIM & Spec Library
AC/DC power • 4×AA alkaline • up to 50,000 cycles
Low-battery indicators • diagnostic LED codes
ADA compliant • compatible with standard US plumbing
Airports • healthcare • education • civic & transportation
|
|
|
