Architect & Contractor Hub
FontanaTouchlessFaucets® — Installation & Specification Hub
Spec-grade touchless faucets, automatic soap dispensers, and sensor restroom controls for high-traffic facilities.
Use this hub to jump into verified category pages, spec-ready model selections, installation planning notes, and support.
Deck-Mount
Wall-Mount
Soap: Foam / Liquid
AC / DC Power
Libraries
Products
Solutions
Videos
Resources
Support
About
FAQ
Trending
Architect Model Hub
Browse spec-ready model families by application
Start here to shortlist faucet and dispenser models for drawings, finish coordination, and procurement.
Open Architect Hub →
Category Index
Fast navigation for schedules and package building
Use verified category pages to build consistent schedules across deck-mount, wall-mount, soap, and flush controls.
Spec Requests
Ask for a submittal-ready selection list
Products
Core categories used in commercial restroom packages: touchless faucets, soap dispensing, and sensor flush controls.
For Specifiers
Specifier Jump-Start
Shortlist a coordinated family, verify mount type, confirm power strategy, then build a clean schedule.
VIDEO
For Contractors
Contractor Quick Links
Choose deck vs wall, confirm rough-in constraints, and standardize on serviceable parts across restroom banks.
VIDEO
Touchless Sensor Faucets
Core touchless category for spec packages, finish coordination, and high-traffic uptime planning.
Open Category
Commercial Sensor Faucets
Heavy-duty models for public restrooms, facilities, and continuous-use applications.
Browse Commercial
Wall-Mount Sensor Faucets
Vandal-resistant wall bodies and clean decks, ideal for retrofit and institutional layouts.
Browse Wall-Mount
Architect Model Hub
A spec-first hub for design teams building consistent families across multiple restrooms.
Open Hub
Automatic Soap Dispensers
Deck and wall options for hygienic dispensing with easier maintenance and cleaner counters.
Browse Dispensers
Automatic Flush Valves
Sensor activated flush systems to reduce touchpoints and support water management goals.
Browse Flush Controls
Solutions
Power planning, hygiene outcomes, and maintenance friendliness for spec-grade restroom packages.
AC / DC Power Planning
Balance uptime, service access, and retrofit constraints
Standardize by zone: hardwire where you can, battery where you must. Keep service access simple and consistent across restroom banks.
Ask for Power Guidance
Water Efficiency
Use sensor shutoff + appropriate flow selection
Pair touchless activation with the right aerator and timeout settings to control use without frustrating users.
Browse Commercial Models
Hygiene Packages
Reduce touchpoints across the full wash sequence
Coordinate faucet, soap, and flush controls so cleaning teams and users get predictable performance every time.
Explore Hygienic Soap
Multi-Feed Soap Systems
Lower refill labor on high-occupancy floors
Plan routing, refill access, and commissioning early, especially for long multi-lav runs and remote fill locations.
Browse Multi-Feed
Project Coordination
Standardize finishes and model families across buildings
Reduce spare parts variety and keep restrooms consistent by limiting the model set and coordinating finishes early.
Start With the Hub
Selections & Support
Get help building a clean, spec-ready shortlist
Tell us the use case, mount type, power preference, and finish targets. We’ll help map a practical model set.
How-To Videos
Short tutorials for cleaner installs, fewer callbacks, and faster commissioning.
Power Planning
Battery vs. Hardwired
Use battery power for fast retrofits and hardwire where you want long duty cycles. Keep transformer access serviceable and consistent across rooms.
Ask Before You Rough-In
Calibration
Reduce False Triggers
Commission sensors after lighting and reflective surfaces are final. Confirm range, timeout, and positioning with real-world hand tests.
Browse Commercial Units
Selections
Build a Consistent Model Set
Limit the number of models per facility so spares and training stay simple. Start from a hub, then narrow by mount type and finish.
Open Architect Hub
Resources
Maintenance Plan
Interval
Task
Notes
Monthly
Clean aerators and sensor windows
Use non-abrasive cleaners. Avoid solvents on coatings.
Quarterly
Inspect power and replace batteries if needed
Standardize battery type. Record service dates per restroom zone.
Annually
Verify shutoff timing and flow performance
Confirm consistent user experience across all fixtures.
About
FontanaTouchlessFaucets® focuses on touchless restroom solutions designed for real-world facility demands.
Specifiers and contractors use the category system to standardize model families, coordinate finishes, and keep maintenance predictable across multi-restroom projects.
Frequently Asked Questions
Do the faucets support both AC and DC power?
Many projects use a mix: hardwire for long duty cycles and battery for fast retrofits. Confirm the best approach for your site by sharing your constraints with support.
What should we standardize first for multi-restroom buildings?
Start with mount type and model family, then lock finish targets. Keeping the model list short makes spares and training simpler.
Where do I start for design teams and schedules?
Use the Architect Hub and the Restroom Touchless index to build a shortlist, then map the final picks to your fixture tags.
How do multi-feed soap systems reduce maintenance labor?
A centralized or shared refill approach can reduce refill frequency and simplify inspections, especially across long sink runs and high-occupancy floors.
