You are here: Home > Best touchless bathroom faucet | Fontana Touchless Faucets^®

Best touchless bathroom faucet

The best touchless bathroom faucet for a project is selected around the wash station’s water supply, user access and temperature-control arrangement. The sensor initiates water delivery; the mixing assembly determines the discharge temperature. Depending on the selected model, that assembly may be an accessible adjustment handle, an integral thermostatic cartridge or a separate point-of-use valve. Confirm the actual configuration before comparing finishes, mounting styles or replacement options.

For accessible installations, assess the whole lavatory—including the temperature control, clear floor space and protected supply pipes—against the U.S. Access Board’s lavatory and sink guidance . Hands-free activation is one part of that assessment.

Technical Insights

A manually adjusted hot-and-cold mixture does not establish thermostatic regulation. Where a project requires outlet-temperature limiting, review the specified valve’s certification, operating limits, minimum flow and supply-failure response. Confirm ASSE 1070 certification where applicable to the selected water-temperature limiting device; verify the listing rather than inferring protection from a “hot and cold” description.

FONTANA

Commercial-Grade Sink Faucets

Fontana Bathroom Specification Resources

Plan the Complete Wash Station

Use these resources to develop the fixture schedule, coordinate supporting systems and review installation documentation.

Installation

Submittals

Project Setting

Selection Guides

Manual Mixing vs. Thermostatic Temperature Control

Compare the mixing mechanism separately from the sensor, power supply and faucet finish.

Technical Criterion	Manual Mixing Arrangement	Thermostatic Arrangement
Control Principle	Manual Mixing Arrangement An adjustment changes the proportion of hot and cold water entering the mixed outlet.	Thermostatic Arrangement A temperature-sensitive element adjusts the mixture within the valve’s documented operating envelope.
Supply Variation	Manual Mixing Arrangement A fixed adjustment can produce a different outlet temperature when inlet conditions change.	Thermostatic Arrangement Regulation depends on compatible inlet temperatures, pressures, flow and installation conditions.
User Adjustment	Manual Mixing Arrangement A deck-mounted lever or an under-basin mixer may provide the adjustment, depending on the model.	Thermostatic Arrangement The setpoint may be user-accessible or secured for facility adjustment, depending on the valve design.
Temperature Limiting	Manual Mixing Arrangement A mixing handle or preset position alone does not establish a certified maximum-temperature safeguard.	Thermostatic Arrangement Confirm the device’s listing, adjustment limits and specified supply-failure response.
Low-Flow Compatibility	Manual Mixing Arrangement Confirm useful adjustment across the selected outlet’s actual flow range.	Thermostatic Arrangement Match the faucet’s delivery rate to the thermostatic device’s minimum operating flow.
Installation Review	Manual Mixing Arrangement Verify hot/cold orientation, connection sizes and access to the adjustment and isolation valves.	Thermostatic Arrangement Check required strainers, check valves, inlet conditions and service clearances against the valve instructions.
Acceptance Evidence	Manual Mixing Arrangement Record the measured outlet temperature at the intended adjustment and normal operating flow.	Thermostatic Arrangement Record the commissioned setpoint and carry out manufacturer-specified performance checks.
Scope of Selection	Use the exact model’s faucet and valve documentation. Sensor activation, temperature indication and thermostatic protection are separate functions.

Hot-water exposure is a separate design consideration from hands-free operation. Refer to CPSC guidance on tap-water scalds when reviewing residential risks. Commercial storage, distribution and outlet-temperature settings should follow the project’s water-management requirements and applicable local rules.

Commissioned for Everyday Handwashing

Outlet Verification Basin Coordination Power Continuity Service Access

A successful installation is demonstrated at the basin. Position the detection zone around the intended handwashing area, observe where the water stream lands and verify that nearby users or reflective surfaces do not trigger unwanted cycles. Establish a commissioning record for the installed outlet and control settings so facility staff can distinguish changes in supply conditions from sensor, valve or power faults.

Technical Insights

Short-Cycle Delivery

Observe the first discharge after an idle period and the temperature reached during normal use. Pipe volume, distance from the mixed-water source and operating flow influence delivery; a selected setpoint does not guarantee instant warm water.

Power and Recovery

Confirm the approved supply voltage, battery specification and low-power indication. Test restart and recalibration as directed by the manufacturer. Treat backup capability as a documented model feature.

Flow and Outlet Selection

Select the outlet for its actual use setting. EPA’s bathroom faucet guidance distinguishes private lavatories from public-use fixtures: the existing WaterSense faucet label applies to private lavatory and bar sink products. Confirm the selected model’s certification and flow data before making a WaterSense claim.

Explore Faucet Systems Compare Mixing Controls

Commercial hotel bathroom fixture collection

Specification Handover Checklist

Assembly schedule: record the faucet, mixing device, outlet and power module model numbers.
Supply readings: document inlet temperatures and operating pressures for the commissioned assembly.
Measured delivery: record outlet temperature and flow using suitable instruments.
Control settings: log detection range, shutoff behavior and any enabled cycle limits.
Service provision: identify isolation points, access clearances and replaceable component references.
Handover documents: retain applicable listings, installation instructions and the maintenance schedule.

Sort By:

Page of 1

Fontana Sénart Gold Gooseneck Touchless Motion Sensor Faucet & Automatic Liquid Soap Dispenser for Restrooms

Retail Price: $1,798.83

starting at: $1,460.66

Fontana Commercial Polished Chrome Automatic Modern Style Electronic Soap Dispenser

Fontana Polished Chrome Automatic Modern Style Electronic Soap Dispenser

Retail Price: $1,145.23

starting at: $1,009.72

Fontana Milan Commercial Chrome Hands Free Electronic Soap Dispenser

Fontana Milan Chrome Hands Free Electronic Automatic Soap Dispenser

Retail Price: $1,083.14

starting at: $887.39

Fontana Milan Commercial Chrome Automatic Hands Free Electronic Sensor Soap Dispenser

Fontana Milan Chrome Automatic Hands Free Electronic Sensor Soap Dispenser

Retail Price: $949.06

starting at: $855.14

Fontana Matte Black Commercial Hands Free Deck Mount Sensor Faucet

Fontana Matte Black Hands Free Deck Mount Sensor Faucet

Retail Price: $1,562.33

starting at: $1,193.64

Automatic Matte Commercial Black Bathroom Faucet

Fontana Dijon Black Automatic Bathroom Faucet

Retail Price: $1,573.87

starting at: $1,204.72

BEST TOUCHLESS FAUCETS