Fontana FS2210 — Wall‑Mount Sensor Faucet + Soap Dispenser

PART 1 — GENERAL
1.1 SUMMARY
  A. Touchless wall‑mounted faucet with integrated soap dispenser for public restrooms.
  B. Basis of Design: Fontana FS2210 or approved equal.

1.2 SUBMITTALS
  A. Product data, cut sheets, and shop drawings with rough‑in.
  B. Samples: Finish samples for exposed components.
  C. Quality Assurance: Listings/approvals as required by AHJ.
  D. O&M data: Cleaning, maintenance, battery replacement (if applicable).

1.3 WARRANTY
  A. Manufacturer’s standard warranty; minimum 5 years on body/valve, [confirm electronics].

PART 2 — PRODUCTS
2.1 MANUFACTURER
  A. Fontana Showers — Model FS2210.

2.2 PERFORMANCE
  A. Operating Pressure: 10–125 psi.
  B. Flow Rate: [____] gpm at [____] psi (verify project requirements).
  C. Power: 110V AC hardwire or 6V DC battery pack.
  D. Controls: Infrared sensors; factory auto‑shutoff (adjustable).
  E. Materials: Solid brass body; finish [Matte Black / ____].
  F. Mixing: Provide thermostatic or manual mixing as indicated.
  G. Electronics: Water‑resistant enclosure; IP rating [____] (submit).

2.3 ACCESSORIES
  A. Supply stops, filters, and backflow prevention as required.
  B. Soap reservoir [capacity ____]; compatible viscosity range [____].

PART 3 — EXECUTION
3.1 INSTALLATION
  A. Install per manufacturer’s instructions and approved shop drawings.
  B. Provide wall blocking and coordinate electrical rough‑in.
  C. Adjust sensor range and flow; verify splash control with basin geometry.

3.2 FIELD QUALITY CONTROL
  A. Functional testing of water and soap cycles.
  B. Verify shutoff timing and leak‑free operation.

3.3 CLOSEOUT
  A. Submit O&M and spare parts schedule; train Owner’s personnel.