Fontana Commercial Oil Rubbed Bronze Touchless Automatic Sensor Faucet

Fontana Commercial Automatic Sensor Faucet is engineered for commercial restroom systems requiring intelligent touchless activation, precise water management, and enhanced hygiene performance. The advanced infrared sensing architecture ameliorates microbial cross-contact, excessive water consumption, fixture-contact dependency, and sanitation deficiencies commonly associated with manually operated plumbing fixtures. Inferior electronic faucets frequently suffer from sensor drift, hydraulic instability, moisture intrusion, delayed shutoff response, and premature solenoid deterioration that increase maintenance-intensive servicing requirements. Commercial-grade brass waterways and optimized electronic controls ensure dependable activation accuracy and flow consistency throughout continuous occupancy conditions. Ideal for healthcare facilities, hospitality developments, airports, educational institutions, and specification-grade public restroom infrastructures.

• Diameter of inlet pipe: DN15
• Diameter of outlet pipe: DN15
• Faucet height: 7.87" (200mm)
• Spout Length: 4.13" (105mm)
• Water Pressure: 0.05Mpa - 0.7Mpa
• Power: DC.6V
• Power Consumption: 0.5MW
• Detection Zone: Factory set 25cm/10" (based on standard inductive board)
• Ambient Temperature: 1 - 45 °C / 33.8 -113 °F
• Degree of protection by enclosure: 1P56
• Battery: 4 x 'AA' size cells
• Operational water pressure range: 0.05 - 0.6MPa
• US standard water supply pipe size: DN15 (G1/2")
• Ambient temperature range: 0.1 - 45ºC
• Sensing distance: 9.84" (25cm)
• Time delay: 0.5 seconds
• Operation duration: Power will automatically cut off after continuous use for 60 seconds
• Pop-up drain: No
• Color: Oil Rubbed Bronze Finish