How to installFontana Rio Commercial Solid Brass Automatic Temperature Control Thermostatic Sensor Faucet | FS-505
Easy step by steps installation instructions for Commercial Sensor Faucet
Visit Product Page
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the products for any shipping damages. If you find damages, do not install.
Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.
sensor
Sensor Faucet Installations Instructions
Size:
Hole Size:
Features: - Cold and Hot integration. It is a mixer with the cold water in the left turning and hot water in the right turning. - Water saving: Water flows out when your hands approach the induction zone, and stop immediately once you draw back your hands. - Low power,electricity-saving: For DC type, 4pcs AA batteries can be used for about 2 years, if the faucet working 200 times a day.
Specification: - Installation Type: Deck Mounted - Installation Holes: One Hole - Finish: Chrome Polished - Valve Type: Ceramic Valve - Suitable Water Pressure: 0.3-1.2 MPa - Temperature of environment:1-45°C (cold&hot water ) - Electric Power: DC Dry Battery - Dia of inlet pipe: G1/2" - Dia of outlet pipe: G1/2" - Power: DC6V (4AA Alkaline batteries) - Power consumption in static: <0.5 mW - Detection Zone: Factory set 30cm - Protection degree: IP56
Smart infrared sensor automatically adjusts the distance according to the environment.
Step 1: Battery Box
Step 2:
sensor
Step 3:
Step 4:
Step 5:
Step 6: Correct way for Hose
Before installing your new mixer, flush through the pipework to ensure removal of debris, turn off the water supply.
Ensure the ‘O’ ring is in place at the bottom of the mixer body.
Push the control cable down through the hole and position the mixer on the basin. From the underside of the basin fit the rubber washer, metal washer onto the threaded tube followed by the nut. Tighten the nut to clamp the mixer to the basin. Tighten the 2 side screws up onto the washer.
CAUTION: Do not over tighten the nut/bolts as this may damage the basin.
Screw the two flexible pipes to the mixer body, but do not over tighten, hand tighten only.
Connect the water supply to the inlet pipes. The hot water should be connected to the front pipe.
Plug together the connectors coming from the mixer to the transformer. Line up the flats on both the plug and socket and firmly push together.
Battery installation and replacement
The unit is supplied with a battery backup. Should the mixer will still not function then the batteries may need replacing. Before installing the mixer fit the supplied batteries as follows. Unscrew the grub screw on the back of the mixer (do not remove) unscrew and remove the cover from the mixer and pull out the battery pack. Undo the screw on the top of the battery pack and remove the lid. Insert the 4 batteries. Place the battery pack back into the mixer, replace the cover and tighten the grub screw.
Flexible Connecting Hose Care must be taken when connecting the flexible connection hose from the power supply box to the spout to ensure it does not bend sharply and kink or twist. See above for recommended ways to fit the flexible connecting hose.
Important: Failure to follow these guidelines may result in poor performance and damage to the flexible connection hose.
Features:
1. Intelligent Detecting: Water comes out once your hands get into the detection zone. And it will stop once you leave the detection zone. Sensor Confirming Time is less than 0.7s. 2. Super mini designed PCB is controlled by computer chip, saving power intelligently. With mini chip controlling, the static power consumption will be no more than 60uA. 3. Hygienic: Self-open and close to free hands from any touching, which can prevent you from bacteria mutual infections. 4. Overtime Protection: It will shut off automatically when it flows more than 1 minute continuously to avoid water wasting caused by obstacles inside detection zone. 5. Detection Zone Adjusting Automatically: With controlling of mini-computer, it can set up the best detection zone according to the environment automatically. 6. Intelligent Power-Saving: Controlled by low-consumption chips and with power-saving working mode, the faucet is super low-consumption. (DC-type products use 4pcs of AA Alkaline batteries. Its statics current is no more than 60μA. Its lifetime can reach 2 years when it uses 300cycles per day.)
Fontana Rio Commercial Solid Brass Automatic Temperature Control Thermostatic Sensor Faucet
This Sensor Faucet is an electronically controlled faucet that eliminates the need to touch or turn handles. Through the use of sensor beams the automatic faucet determines when an object is in front of it and automatically turns on the faucet. Since there is nothing to touch and nothing to reach for, an automatic faucet eliminates all of that cleaning and disinfecting that you do to try to maintain a hygienic surface. Bathroom sensor faucets are anti-erosion, anti-abrasion and high strength. Minimize waste of water, by using the automatic faucet. Immediately reduces water waste by eliminating unnecessary and unattended water flow. Ideal for commercial use applications in public restrooms, restaurants, office building, public facilities, hospitals. Fits all US Standard plumbing. Fits all US Standard plumbing.
Features:
Visit Product Page
Brand Name: Fontana
Model Number: FS-505
Finish: Chrome
Surface Treatment: Polished
Battery Type: 4 x "AA" Alkaline Batteries (purchase separately)
Water Pressure: 0.5-7.0 KGS/CM, 10-125 PSI
Compliance: ADA
Material: Solid Brass
Overall Height: 7"
Spout Height: 3-1/2"
Spout Reach: 4"
Number of Hole: Single Hole
Flow Rate: 1.3 GPM (gallons-per-minute)
Maximum Deck Thickness: 1-5/8"
Auto Shutoff: 30 Seconds (Factory set, can be adjusted)
Usage: Commercial / Residential
Unique Design
Touchless
Our client list attests to the quality of our products and services
Browse Our
PRODUCTS
For a clean and comfortable restroom experience in public spaces, explore our premium built-in precision infrared sensor. Check out our touchless hardwired and battery-operated automatic soap dispenser with adjustable soap dispensing volume control
Touchless Operation Faucets Best for Commercial Use!
Latest Technology Automatic Touchless Faucets
Improves hygiene in public restrooms and private bathrooms with touchless motion activated sensor faucets Our Motion Sensor Faucet are Suitable for Heavy Traffic Commercial and Residential Applications. We offer the best commercial motion touchless faucets. Best Overall State of the Art Fontana Touchless Faucet Best Award for Hygiene, Reliability , Vandal Resistance, Water Efficiency, Lower Operating Costs and Convenience.
Powered Touchless Faucets for Public Toilets
For a Clean, Comfortable Restroom Experience in public spaces; see our Premium built-in precision infrared sensor. Explore our Touchless Hardwired and Battery Operated Automatic Soap Dispenser w/Adjustable Soap Dispensing Volume Control. They are Best Automatic Faucets and Soap Dispensers for Public Restroom Design
Touchless faucets are mostly used in commercial / public bathrooms to help conserve water and reduce the spread of germs. Our Sensor Faucets are widely used in Commercial Lavatory & Bathroom in Public Facilities they are state of the art adaptable motion activated countertop and wall mounted smart hands free faucets best suited for commercial restrooms; our ADA compliant commercial restroom and lavatory electronic faucet comes AC and Battery-Powered. You can help in creating a more hygienic choice in washing hands in public spaces by designing touchless solutions for Proper Hand Hygiene.
